Q-Sphera™ – Next Generation Somatostatin Analogue delivery system?

757z468_1-SG02126-(1)

From my article about the somatostatin analogues and their drug delivery systems pipeline, there has been a very interesting development in a product called Q-Sphera (was previously known as Q-Octreotide).  In a press release today, it was announced that an unnamed ‘pharma giant’ has signed a deal with Midatech Pharma Plc that will see it evaluate the latter’s Q-Sphera drug delivery platform.  Only a guess from me, but I suspect it’s either Novartis or Ipsen (but other possibilities are emerging).

Midatech’s Q-Sphera™ is an advanced microencapsulation and polymer-depot sustained release (SR) drug delivery platform produced using a novel and disruptive printing based process, with numerous and distinct advantages over conventional reactor based technologies. From a manufacturing perspective Q-Sphera™ is a precise, scalable, efficient, and environmentally friendly microparticle platform. From a clinical perspective Q-Sphera™ ensures monodispersed microparticles that release active drug compounds into the body in a superior linear tightly controlled and predictable manner over an extended period of time from 1 – 6 months.  An injection lasting 6 months sounds very exciting but I have no more detail on the feasibility or likelihood of such a change in frequency with Octreotide or Lanreotide but the press release does mention the possibility, i.e. “Q-Sphera allows drug compounds to be released into the body in a “highly controlled manner” over a prolonged period of time; potentially from a few days to up to six months.”

What’s the main differences?

The current trials are based on the use of Sandostatin LAR (Octreotide) using the Q-Sphera delivery system (previously known as Q-Octreotide). The key aspects of usability are reconstitution and needle size but there is also an inference that less frequent injections could be possible.   A comparison of the trial output is as follows:

  • Reconstitution: For Sandostatin LAR (SLAR)™ the procedure to prepare the product for injection is a complex 30 step error prone process, taking up to 40 minutes and, once reconstituted, the product has to be given immediately to prevent solidifying and wastage of the injection. For MTD201™ Q-Octreotide the preparation process is a simple 5 – 7 minute procedure, after which the product is stable up to 2 hours. For the nurse preparing and giving the injection, the short and flexible process of MTD201™ has clear advantages over the all consuming SLAR process™.
  • Needle size: For SLAR, a large 19G needle is prescribed for the injection to prevent blockage, and often an even large 18G needle is required for successful injection. For MTD201 Q-Octreotide the precision microencapsulation technology means that a much smaller 21G needle can be used, and there are no blockages. Other Q-Sphera products use even finer needles as small as 27G. The importance of this is evident from the first-in-human phase I data where MTD201 had lower injection pain – 8% for MTD201 versus 25% for SLAR™, and much lower injection site
    tenderness – 8% for MTD201 versus 83% for SLAR.

This is an exciting development and I will keep this article live with further information as I receive it.

Thanks for reading

Ronny

I’m also active on Facebook. Like my page for even more news. I’m also building up this site here: Ronny Allan

Disclaimer

My Diagnosis and Treatment History

Most Popular Posts

Sign up for my twitter newsletter

Read my Cure Magazine contributions

Remember ….. in the war on Neuroendocrine Cancer, let’s not forget to win the battle for better quality of life!

patients included

Please Share this post

Author: Ronny Allan

Facebook: https://m.facebook.com/NETCancerBlog and https://m.facebook.com/RonnyAllanBlog twitter: @ronnyallan1 twitter: @netcancerblog

5 thoughts on “Q-Sphera™ – Next Generation Somatostatin Analogue delivery system?”

  1. I don’t understand everything in this post, particularly in the second paragraph, but the idea of less frequent injections is definitely an exciting one! In my experience, the Sandostatin reconstitution doesn’t involve anywhere near 30 steps and takes much less than 40 minutes (my nurse is never here for more than about 15 or 20 minutes). My biggest issue has been the build up of scar tissue from the monthly injections. Attempting to inject into scarred areas has led to sometimes having to have 2, 3, or even 4 pokes to get the medication in. That’s never fun! Please keep us posted as you hear more on this topic.

  2. All sandostatin is amino acids, one of doctors I believe wolin stated that in Las Vegas conference this year. So people are paying 15,000 or more a shot, when you can buy all these off line and take them orally. You can also take a blood test to check your amino acids also. You would just need a doctor to write it up for you. Something to chew on.

Leave a Reply